-
Footprint 3/8″ – 10mm Chisel. Unused.
Footprint 3/8″ – 10mm Chisel. Unused. Made in Sheffield England.
-
Ward Small Pig Sticker Mortice Chisel
Small Ward Pig Sticker Mortice Chisel. 1/4″ blade width and just 8″ long. Handle in a poor state. Heavy duty user.
-
9/32″ inch Ward Socket Mortice Chisel
Ward 9/32″ (7mm) heavy socket mortice chisel. Nice user chisel with a replacement handle. Edge is OK, but needs sharpening to be bench ready
-
Thos Ibbotson & Co 3/8″ pig sticker mortice chisel
Thos Ibbotson & Co 3/8″ pig sticker mortice chisel with split replacement handle. The chisel blade is 6 1/4″ long and 3/8″ wide. Needs sharpening.
-
Stanley No. 40 “Everlasting” 3/4″ Bevel Edge Pocket Chisel
Stanley No. 40 “Everlasting” bevel edge pocket chisel. 3/4″ wide. Amazing condition chisel might suit collector. Selling by Old Tool Shop via Ebay.
-
Rare Stanley No. 45 “Everlasting” Sweetheart 1/2″ Square Edge Pocket Chisel
Stanley No. 45 “Everlasting” Sweetheart square edge pocket chisel. 1/2″ wide. Rare collectors item. Selling by Old Tool Shop via Ebay.
-
Henry Crookes & Co. 3/8″ Pig Sticker Mortice Chisel
Henry Crookes & Co. 3/8″ Pig Sticker Mortice Chisel and approx. 13″ long. Heavy duty user or collector in awesome condition.
-
Ferdin Rubens mortice chisels set
Ferdin Rubens mortice chisel set. German made chisels with big handles. More than 100 years old, but great condition. Suit collector.
-
7/8″ inch Charles Taylor Socket Mortice Chisel
Charles Taylor 7/8″ (22mm) heavy duty socket chisel. Nice user chisel with a replacement handle, but original reinforcing ring.
-
1 1/4 inch Ward Heavy Socket Mortice Chisel
Ward 1 1/4″ heavy duty socket chisel. Over 15″ long. Marked Ward Cast Steel with Ward and Payne hammers and anvil logo. Replacement handle.
-
Ward and Payne Pig Sticker Mortice Chisel
Ward and Payne Heavy Duty Pig Sticker Mortice Chisel. 1/2″ blade width and over 13″ long. Heavy duty user or collector.
mortice
Mortice or mortise chisels. These are often confused with firmer chisels, but they have thicker blades to allow for levering out waste. That also are generally supposed to have a shallower angle bevel (35-45 degrees) to help retain the sharp edge under heavy loads.
Showing all 11 resultsSorted by latest