Pruning Saw with two saw blades
Unbranded pruning saw featuring a wooden handle and two interchangeable blades. Ideal for orchard and garden work.
-
Disston Coping Saw
Disston coping saw with steel frame and wooden handle. Adjustable blade pins and slim tensioned blade. Classic workshop tool in reasonable condition.
-
Eclipse No.7 Coping Saw
Eclipse No.7 coping saw with steel frame and wooden handle. Adjustable blade pins and slim tensioned blade. Classic workshop tool in solid condition.
-
Brass and Rosewood Pad Saw
Brass and rosewood pad saw with fine pointed blade. Classic keyhole saw for detailed woodworking cuts and traditional tool collections.
-
Spear & Jackson 10″ Tenon Saw
Spear & Jackson 10″ tenon saw with straight plate, brass back, and beech handle. Reasonably sharp teeth and classic joinery design. Good user.
-
Vintage Flush-cut Saw – 11 3/4″ saw blade
Flush‑cut saw with 11¾” plate, offset spine, and ~13 TPI. Benefit from sharpening but good tooth spacing. Ideal for trimming dowels and flush‑cut joinery.
H Disston and Sons 12″ tenon saw
Vintage Disston 12″ steel back tenon saw. Features a straight saw plate, 12 TPI, good tooth profile, and beech handle. Needs sharpening.
-
Vintage Spear & Jackson 14 Inch Mermaid Saw
Vintage Spear & Jackson 14″ Mermaid brass back saw. Features heavy brass spine, original medallion, cast steel blade, but needs attention.
French Jewellers Fret Saw
French Jewellers Fret Saw. Manufacturer unknown, but marked Breveté SGDG, Marque Déposée and has a bulls-head logo in several places.
-
Vintage Pad Saw
Vintage pad saw. Brass collar and believed to be boxwood. Unnamed. Blade is in great order and can extend by 9″. Beautiful and useable tool.
-
Disston D100 Handsaw
Disston D100 Handsaw. Made in USA and rarely found in Australia. Appears sharp and sharpened rip with about 7 or 8 TPI.
-
5 inch Lancashire pattern saw
Lancashire Pattern saw. Most likely English. Possibly Moseley and Sons. 5 inch blade. Needs Sharpening.
-
Stair Saw for restoration
Stair saw for restoration. All the teeth are present, but not sharp. 6 tpi. The plate isn’t quite straight. Nice curio.
Jeweller’s Fret / Piercing Saw
Adjustable length jeweller’s fret / piercing saw. Original frame screw replaced with an Allen screw and likely re-tapped. Otherwise, a pretty little saw.
Bowden & Co 12″ steel backed saw
Bowden & Co 12″ steel backed saw with split nuts. Handle has a little vertical movement and teeth need refiling. Back & plate are almost straight.
-
Nest of Saws with three interchangeable plates
Nest of saws with three interchangeable plates possibly for use as table saw, pruning and compass saw. Great condition
Saws
Hand Saws including tenon saws, gents saws, hack saws, frame saws. rip saws, japanese pull saws, mitre saws and more
Showing 1–16 of 17 resultsSorted by latest
