Mouse sized granny’s tooth plane
Small granny’s tooth plane made from an old Ward chisel. Body is just over 3 1/2″ long and 1 5/8″ wide. Iron is reasonably sharp.
Vintage Cigar Cutter
For sale nice vintage cigar cutter. Could maybe be used as guillotine for smaller woodworking items. Will need sharpening.
-
Mallet
User-made mallet. It could be for panel beating, carving or cricket bat seasoning. Nice quality hardwood mallet. 600grams or 24oz
Sydney Caulking iron
Sydney caulking iron. Almost 2 1/2″ wide. The iron is light at around 200grams. Good condition apart from mushrooming evident in pictures.
-
Vintage sanding block
For sale unnamed vintage 4″ sanding block. Nice action to secure the sandpaper. One of the pins has been replaced and no longer pivots easily, but useable.
-
NSW Transport Department Adjustable Wrench
NSW Transport Department (2Kg) adjustable wrench. A piece of New South Wales history. Possibly used on NSW trains.
-
Brace washer cutter
Unnamed brace washer cutter with double ended washer marking head. For washers between about 1/2″ radius and 2 1/2″ radius.
-
Stair Saw for restoration
Stair saw for restoration. All the teeth are present, but not sharp. 6 tpi. The plate isn’t quite straight. Nice curio.
-
User-made tongue plane – 1/4″ iron
User-made 1/4″ tongue plane. This is a well-made tool from dense hardwood. Iron appears to be forged. Nice user.
-
User-made grooving plane – 13/32″ (10mm) iron
User-made grooving plane. This is a well-made tool from dense hardwood. Iron appears to be reclaimed vintage. Nice user.
-
Unusual 7 1/4″ Ball Pein Hammer
Tiny 7 1/4″ ball pein hammer. No maker identified. Maybe its for jewellery. Weighs around 5 ounces (less than 150 grams). Very cute.
-
Silver Carpenter’s Pencil Holder
Carpenter’s Pencil Holder in hallmarked sterling silver. Bearing the initials and date GOO and 21 April 2013. A really lovely object.
-
User-made brass and wood Bevel Gauge
User-made brass and wood bevel gauge with two brass bevel plates. Probably not that old based on the 1mm thickness of the brass.
-
12″ Dividers
Large unnamed dividers. 12″ (300mm) long allowing an arc of more than 13″ to be marked out. Very useful and solidly built tool.
Unnamed Gents Saw 5″ plate
Unnamed Gents Saw with 5″ (125mm) plate. Butterfly nut secured at one end. 15 tpi. Great for cutting smaller dovetails or veneers.
Jeweller’s Fret / Piercing Saw
Adjustable length jeweller’s fret / piercing saw. Original frame screw replaced with an Allen screw and likely re-tapped. Otherwise, a pretty little saw.
Unbranded
Showing 49–64 of 107 resultsSorted by latest
