Great vintage tools for sale at the Old Tool Shop. For international shipping rates please refer to our international shipping rates page and confirm those rates by contacting us. For refunds and returns policy please read our refund_and_returns_policy. Please note the dimensions and weights quoted in each item’s Additional Information tab are the packaged dimensions and weights.
-
Mitutoyo 0-1″ Micrometer
Mitutoyo 0-1″ Micrometer. Top quality tool, in good condition. Reading nearly 2 thou’ out consistently. Otherwise a solid user.
-
Titan 7/8″ Bevel Edge Chisel
Titan 7/8″ Bevel Edge Chisel. Made in Australia. 10 1/2″ long. Good user or crisp example for collector, with original handle and logo.
-
EA Berg 1 1/4″ (32mm) bevel edge chisel
EA Berg 1 1/4″ (32mm) bevel edge chisel. Made in Sweden. Replacement handle. Steel has a few issues. Bargain for someone who can restore.
-
Marples marking gauge
Beech Marples marking gauge. England. Stem is marked in inches. Possibly a replaced pin. Brass screw has worn a trench in the stem, but usable tool
-
J Rabone & Sons No. 1460 4″ Caliper Rule
J Rabone & Sons No. 1460 4″ Caliper gauge. Made in England. Measure down to 32nds on the brass. Probably only for collectors.
-
Moore & Wright Engineers Scriber
Moore & Wright Engineers Scriber. Made in Sheffield, England. Nice tool except the tips could do with re-grinding.
-
Silver Carpenter’s Pencil Holder
Carpenter’s Pencil Holder in hallmarked sterling silver. Bearing the initials and date GOO and 21 April 2013. A really lovely object.
-
User-made brass and wood Bevel Gauge
User-made brass and wood bevel gauge with two brass bevel plates. Probably not that old based on the 1mm thickness of the brass.
-
Silex 78 bevel gauge
Large Silex 78 bevel gauge. Made in Australia. Beam plate has been wire-brushed. Working tool with majority of plating in place.
-
Rabone Chesterman 1161 folding ruler
Rabone Chesterman 1161 1m folding ruler. Made in England. Great condition, but brass plating of metalwork has flaked off in places
-
Moore & Wright 10 1/2″ dividers
Moore & Wright 10 1/2″ spring dividers. Made in Sheffield, England. Missing the knurled finger hold at the top.
-
Starrett Taper Gauge 269MB
Starrett Taper Gauge 269MB for measurement of 12 to 25mm gaps, holes and slots. Came lubricated in original plastic sleeve and box.